If the high pressure hydraulic hoses of good quality are used improperly, it will also cause some bad consequences and shorten the life of the high pressure hydraulic hoses. In fact, most high pressure hydraulic hoses are damaged due to improper use. Here are some common consequences of improper use:
During the working process of the high pressure hydraulic hose, the system generates heat due to the power loss of the conveyed liquid. In addition, the external weather and temperature factors can cause the temperature of the conveyed liquid to increase rapidly. The conveyed liquid in a higher temperature range will accelerate the aging of the inner rubber, which will lead to the decline of sealing, strength, and elasticity. At this time, the high-pressure hose will It's easy to burst. The above problems occur in the inner rubber layer, and it is difficult to find and eliminate the problems in time. Therefore, during the use process, if it is found that the temperature increases rapidly, it is necessary to take cooling measures in time, and often check the high pressure hydraulic hoses before putting it into use.
Unreasonable selection and installation of high pressure hydraulic hoses will also lead to adverse consequences. For example, if there is friction between the high pressure hydraulic hoses, it is easy to cause abrasion of the outer layer of rubber, affecting the life of the high pressure hydraulic hoses. When choosing a high pressure hydraulic hose, it is necessary to consider its use and installation environment. According to the use and installation environment, proper high pressure hydraulic hoses with appropriate length, working temperature, working pressure, number of steel wire layers and minimum bending radius should be selected. In addition, according to your own use condition, you should also choose appropriate high pressure hydraulic hoses' joints and use pipe clamps in places where friction is likely to occur. Other high pressure hydraulic hose installation precautions can read the following article: Tips During the Installation of High Pressure Rubber Hose.
During the use of the high pressure hydraulic hoses, if it is subjected to severe pressure shocks for several times, it will cause partial damage to the hose, which will easily cause the hose to foam and burst; in addition, it is also easy to cause the joint to loosen and leak. Therefore, during use, pay attention to slowly opening the valve to reduce the number of severe pressure shocks of the high pressure hydraulic hoses.
The above are some adverse consequences that may be caused by improper use of high pressure hydraulic hoses, I hope it's helpful to you. And hongxiang provide high quality hydraulic hoses with detailed product description, contact us to get a professional advice!
Copyright © Hengshui Hongxiang Rubber Products Co., Ltd. All Rights Reserved | Sitemap | Powered by: