Six factors to consider when choosing high pressure rubber hoses assembly

There are many factors that affect the selection and application of the high pressure rubber hose assembly. Only by considering comprehensively can the practicability and economy of the high pressure rubber hose assembly be guaranteed.

Here are the factors to consider when buying high pressure rubber hose assembly:

1. First consider the operating conditions:

The primary consideration in selecting a suitable high pressure rubber hose assembly is what scenarios the hose assembly will be used in and what working range requirements. The main things to consider are: working temperature, working pressure and the physical and chemical properties of the transported liquids. Selecting a high pressure rubber hose assembly suitable for the working environment can slow down the aging of the hose assembly and avoid accidents.

2.Consider the specification of hose

The specifications of the hose mainly include the inner and outer diameters, and the process and number of layers of the reinforcement layer according to the working conditions of the high pressure rubber hose assembly. The inner diameter of the high pressure rubber hose assembly is a question that is easily overlooked. It determines the flow rate of the conveyed liquid. If the conveyed liquid is too little and the inner diameter of the high pressure rubber hose is selected too large, the flow rate will be too fast and the working efficiency will be reduced. At the same time, the system of the high pressure rubber hose will be heated, and the unnecessary cost of high pressure rubber hoses will be increased. Secondly, in the process of installing the high pressure rubber hose assembly, in order to avoid friction, pipe clamps will be used to fix it, so the outer diameter of the high pressure rubber hose also needs to be considered.

3.Consider the length of hose assembly

The length of the high pressure rubber assembly also needs to be considered when choosing, which is determined by your work site conditions.

4.Consider the joints type

Besides the high pressure rubber hose, one of the essential accessories of the high pressure rubber hose assembly is the joint of the high pressure rubber hose, which is used to connect the rubber hoses, and there are various options. The detailed choosing methods can read the article: Four ways to select proper high pressure rubber hoses joints.

5.Consider the installing method of hose assembly

The specific piping method must also be considered before purchasing the high pressure hose assembly. This factor affects the several selection results mentioned above, such as: the reinforcement layer production process of the high pressure rubber hose, the selection of the joint angle of the high pressure rubber hose, and the length of the high pressure rubber hose assembly.

6.Consider the protection measures of hose assembly

Generally, in order to prevent the outer rubber layer of the high pressure rubber hose assembly from being eroded or rubbed, protective measures will be implemented. Common protective measures for high pressure rubber hoses include the following methods: nylon protective sleeve, steel wire protective sleeve, outer braided steel wire cover, and cloth rubber outer layer.