What Should be Noticed in the Use of High Pressure Rubber Hose

High pressure rubber hose is a kind of pipeline commonly used in machinery and equipment as well as in construction, agriculture, mining and many other fields. According to the differences in structure and materials, there are many types of high pressure rubber hoses. The usage environment is also different.

These properties of high pressure rubber hoses are the primary consideration in use. For specific hoses, appropriate products must be selected according to their own use environment and used under limited use conditions. Incorrect reference to the parameters of the high pressure rubber hoses may lead to accelerated aging of the hoses. And the following should be noticed:

1. Materials to be conveyed: Different types of high pressure rubber hoses also have requirements for the materials to be transported, otherwise other materials may cause the hose to accelerate aging and cause losses. The characteristic, temperature and concentration of the conveying material should be noted

2. Operating temperature and pressure: For different types of hoses and different types of conveying materials, the temperature range and maximum working pressure during use are required to be different. During use, notice use within the rated range.

3. Minimum bending radius: Each type of hose has its own minimum bending radius. During use, it cannot be smaller than the minimum bending radius required by the high pressure rubber hose. In addition, bending at the joint should be avoided, which will easily cause the joint to loosen and also cause the blockage of the conveying materials.

In the process of daily use, the following should also be noticed to reduce the occurrence of accidents and ensure the normal operation of the system:

1. When controlling the high pressure rubber hose valve, be careful not to operate it quickly, which will cause impact on the high pressure rubber hose and may cause damage.

2. For the high pressure rubber hose that has exceeded its period of use, it can only be used again after a professional inspection.

3. In the process of daily use, notice frequent inspection of the high pressure rubber hose assembly, and replace the corresponding parts in time when problems are found.

The above are the points that need to be noticed in the use of high pressure rubber hoses. Reasonable selection and use can ensure safety, slow down the aging process of the hose, and reduce losses.