Five types of commonly used steel wire spiraled reinforced hydraulic hoses

The high pressure steel wire spiraled rubber hose is a kind of high pressure rubber hoses with the reinforcement layer made by alternate winding process. The inner diameter of the high pressure steel wire spiraled rubber hoses is generally from DN6mm to DN102mm.

The following are the common types of high pressure steel wire spiral rubber hoses and the introduction of their respective types. There are the following five common types:

1. DIN EN856 4SH

This type refers to a four-layer steel wire spiraled rubber hose with DIN EN856 standard.

2. DIN EN856 4SP

This type refers to a four-layer steel wire spiraled rubber hose with DIN EN 856 standard, which unlike DIN EN 856 4SH hoses, is flame and static resistant.

3. SAE 100 R12

This type refers to a four-layer steel wire spiraled rubber hose with SAE 100 standard, and unlike the steel wire spiraled rubber hoses mentioned above, it has a maximum working pressure of 28MPa.

4. SAE 100 R13

This type refers to a six-layer steel wire spiraled rubber hose with SAE 100 standard, which has better resistance to high pressure.

5. SAE 100 R15

This type refers to a four or six-layer steel wire spiraled rubber hose with SAE 100 standard, which has better high pressure resistance.

The above are the types and introductions of the five common high pressure steel wire spiral rubber hoses. I hope it will help you in your selection. For the product details of the high pressure steel wire spiraled rubber hoses, please see the product catalog.